您所在的位置是:进出口服务网 > 推荐产品 > WELLSEE 120W-6KW solar inverter WS-P1000
WELLSEE 120W-6KW solar inverter WS-P1000
- 发布人:
- Ava
- 联系电话:
- 027-86826688

- 产品型号:WS-P1000
- 官方报价:0.0000
产品介绍:
1, Micro CPU processor control;
2, Pure Sine Wave Form. AC Output;
3, Work with AC Equipment widely, such as Air-condition, refrigerator, Pump, TV, Light, Fan and so on;
4, Intelligent LED display, contain display of Fault, Saving Mode, Power Capacity, Low Voltage, Charging Current, Battery;
5, Saving 12% Power at least on the basic of Saving Mode;
6, Full Rang of Intelligent Protection;
7, Easy to Install and Friendly Operation;
8, Voltage and Frequency is Optional:220V/110V+-10%,50/60Hz
打开微信,点击底部的“发现”,使用“扫一扫”即可将网页分享至朋友圈。

- Functions:1. Wellsee Solar Street Lamp Controller can prevent the battery from over-charging and over-discharging. 2. Wellsee Street Light Controller can prevent reverse charging (the battery charges the solar panel).3. Wellsee waterproof lamp controller can prevent reverse connection of the battery and solar panel. 4. Wellsee solar garden light controller will start up the lighting system in the evening automatically according to the intensity of the light.5. Wellsee Solar Lighting Controller will shut down the lighting system according to the time setting or shut down the lighting system automatically when it is dawn.6. Wellsee Solar road lamp controller has a LET indicator of the working condition of charging and discharging:l One piece of Charge Indicator LED (mark: Charge). When the light is on, the battery is being charged; flickering light means floating charge, no light means charging stops.l One piece of Load Indicator LED (mark: Light). When it is bright, there is output and load can work; if LED goes out, there is no output and the load cannot work.l Battery indicator: red under =voltage Green =full Yellow =normal

- Product features: 1. Applicable to various types of batteries 2. MPPT function3. Microprocessor controller pulse width modulation (PWM) charging 4. Temperature sensor battery charging compensation5. Overload protection (automatic restoration) 6. Overcharge protection 7. Short circuit protection (automatic restoration) 8. Thunder protection 9. Reverse discharge protection10. Reverse polarity connection protection (automatic restoration)11. Under voltage protection

- Functions: 1. Overload protection 2. Short circuit protection3. Converse discharge protection4. Reverse polarity connection protection5. Thunder protection6. Low voltage protection7. Overcharge protection8. Batteries stop and charge voltage HVD sets up9. Charge and low voltage LCD sets up10. Display the capability of the battery SOC11. Loads and comeback setups.12. Intellectualized temperature compensation13. Record and calculate the charged AH and display it on the LCD screen.14. Record and calculate the discharged AH and display it on the LCD screen.15. CPU control and LCD display

- FunctionsAutomatic recognition of input voltageApplying with various types of durable batteriesMicro processing controller Pulse Modulation Wide-frequencyPWMchargeSetting the voltage of low voltage cut-off/resuming connection of the DC output of the load portTemperature sensor for charging a battery in compensationProtective circuit of PV from reverse-charging. Overloading protectionOvercharge protection Short circuit protection The temperature compensate Reverse polarity connection protectionConverse discharge protection Thunder protectionLow voltage protection